What parameters should be confirmed before customization of industrial nitrogen generator

Oxygen is widely used in industry, such as metallurgy, mining, wastewater treatment, etc., which can use oxygen to improve production efficiency and product quality.

But specifically how to choose a suitable oxygen generator, you need to understand several core parameters, namely flow rate, purity, pressure, altitude, dew point,

If it is a foreign area, you may also need to confirm the local current system:

At present, the oxygen generators on the market are basically customized products, which are completely manufactured according to customer needs.

The better the equipment is in line with the actual use requirements: otherwise, there will be problems such as insufficient system capacity or idle capacity.

Usually, the first step to understand the demand is to understand the use of oxygen. According to the use of oxygen, professional manufacturers can draw a general equipment configuration framework.

It is to match some special requirements to adjust the matching appropriately;

Of course, if the device is used in a special area, such as in some high-altitude areas or abroad, then the configuration of the device must be considered.

Consider the local oxygen content, temperature and pressure factors, otherwise the calculation of the flow and purity of the product gas will be out of line with the actual demand; in addition, the local the power output system is also confirmed in advance to avoid problems in use.

Among the core parameters of the equipment, the flow rate is undoubtedly one of the important parameters. It represents how much gas the user needs, and the unit of measurement is Nm3/h.

Then there is the oxygen purity, which represents the percentage of oxygen in the produced gas. Secondly, the pressure refers to the outlet pressure of the equipment, generally 03-0.5MPa. If the pressure required by the process is higher, it can also be pressurized as needed. Finally there is the dew point, which represents the water content in the gas, the lower the dew point, the less water there is in the gas. The atmospheric dew point of oxygen produced by the PSA oxygen generator is ≤-40 °C. If it needs to be lower, it can also be considered to increase.

Add suction dryer or combined dryer.

The above parameters are all to be confirmed before the industrial oxygen generator is customized; as long as the parameters are accurate, the manufacturer can provide a more reasonable, more economical and more suitable system configuration setup plan.