NUZHUO High Purity 99.6% 50-200 Nm3/H Oxygen Plant For Sale Liquid Oxygen Machine Factory Price

Product Detail

Product Description

Model	NZDON-50/50	NZDON-80/160	NZDON-180/300	NZDON-260/500	NZDON-260/500	NZDON-550/1000	NZDON-750/1500	NZDONAr-1200/2000/30y
O2 0utput (Nm3/h)	50	80	180	260	350	550	750	1200
O2 Purity (%O2)	≥99.6	≥99.6	≥99.6	≥99.6	≥99.6	≥99.6	≥99.6	≥99.6
N2 0utput (Nm3/h)	50	160	300	500	700	1000	1500	2000
N2 Purity (PPm O2)	≤10	≤10	≤10	≤10	≤10	≤10	≤10	≤10
Liquid Argon Ouput ( Nm3/h)								30
Liquid Argon Purity ( Ppm O2 + PPm N2)								≤1.5ppmO2 + 4 p p mN2
Liquid Argon Pressure ( MPa.A)								0.2
Consumption (Kwh/Nm3 O2)	≤1.3	≤0.85	≤0.68	≤0.68	≤0.65	≤0.65	≤0.63	≤0.55
Occupied Area (m3)	145	150	160	180	250	420	450	800

Product Specification

1. Design principle of this plant is based on the different boiling point of each gas in the air. Air is compressed, precooled and got removal of H2O and CO2, then to be cooled in the main heat exchanger until it is liquified. After rectification,production oxygen and nitrogen can be collected. 2. This plant is of MS purification of air with boosting turbine expander process. It is a common air separation plant, which adopts complete stuff filling and rectification for argon making. 3. Raw air goes to air filter for removal of dust and mechanical impurity and enters air turbine compressor where air is compressed to 0.59MPaA. Then it goes into air precooling system, where air is cooled to 17 ℃. After that, it flows to 2 molecular sieve adsorbing tank, which are running in turn, to be got removal of H2O, CO2 and C2H2. * 1. After purified, air mixes with expanding reheated air. Then it is compressed by middle pressure compressor to be divided into2 streams. One part goes to main heat exchanger to be cooled to -260K, and sucked from the middle part of main heat exchanger to enter expansion turbine. Expanded air returns to main heat exchanger to be reheated, after that, it flows to air boosting compressor. The other part of air is boosted by high temperature expander, after cooling, it flows to the low temperature boosting expander. Then it goes to cold box to be cooled to ~170K. Part of it would still be cooled, and flows to bottom of lower column via heat exchanger. And other air is sucked to low tempt. expander. After expanded, it is divided into 2 parts. One part goes to the bottom of lower column for rectification, the rest returns to main heat exchanger, then it flows to air booster after being reheated. 2. After primary rectification in lower column, liquid air and pure liquid nitrogen can be collected in lower column. Waste liquid nitrogen, liquid air and pure liquid nitrogen flows to upper column via liquid air and liquid nitrogen cooler. It is rectified in upper column again, after that, liquid oxygen of 99.6% purity can be collected at the bottom of upper column, and is delivered out of the cold box as production. 3. Part of argon fraction in upper column is sucked to crude argon column. There are 2 parts of crude argon column. The reflux of second part is delivered to the top of first one via liquid pump as reflux. It is rectified in crude argon column to get 98.5% Ar. 2ppm O2 crude argon. Then it is delivered to the middle of pure argon column via evaporator. After rectification in pure argon column, (99.999%Ar) liquid argon can be collected at the bottom of pure argon column. 4. Waste nitrogen from top of upper column flows out of the cold box to purifier as regenerative air, rest goes to cooling tower. 5. Nitrogen from top of assistant column of upper column flows out of cold box as production via cooler and main heat exchanger. If no need nitrogen, then it could be delivered to water cooling tower. For cold capacity of water cooling tower is not sufficient, a chiller needs to be installed.

Product Advantages

1.Simple installation and maintenance thanks to modular design and construction. 2.Fully automated system for simple and reliable operation. 3.Guaranteed availability of high-purity industrial gases. 4.Guaranteed by the availability of product in liquid phase to be stored for use during any maintenance operations. 5.Low energy consumption. 6.Short time delivery.

Application Fields

Oxygen, nitrogen, argon and other rare gas produced by air separation unit are widely used in steel, chemical industry,refinery,glass, rubber, electronics, healthcare, food, metals, power generation and other industries.

Product Tags

Liquid Oxygen Machine